AN thread

The AN thread is a particular type of fitting used to connect flexible hoses and rigid metal tubing that carry fluid. It is a US military-derived specification that dates back to World War II and stems from a joint standard agreed upon by the Army and Navy, hence AN.

AN sizes range from -2 (dash two) to -32 in irregular steps, with each step equating to the OD (outside diameter) of the tubing in 1/16" increments. Therefore, a -8 AN size would be equal to 1/2" OD tube (8 x 1/16 = 1/2). However, this system does not specify the ID (inside diameter) of the tubing because the tube wall can vary in thickness. Each AN size also uses its own standard thread size.

AN fittings are a flare fitting, using 37° flared tubing to form a metal-metal seal. They are similar to other 37° flared fittings, such as JIC, which is their industrial variant. The two are interchangeable in theory, though this is typically not recommended due to the exacting specifications and demands of the aerospace industry. The differences between them relate to thread class and shape (how tight a fit the threads are), and the metals used.

Note that 37° AN and 45° SAE fittings and tooling are not interchangeable due to the different flaring angles. Mixing them can cause leakage at the flare.

Originally controlled by the specification MS33656, but is now controlled by SAE-AS4395.

Size comparison[1]
AN size -2 -3 -4 -5 -6 -8 -10 -12 -16 -20 -24 -28 -32
Tube OD (Hose ID) 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2"
SAE thread size 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/4-12 2-1/2-12
Pipe thread size (NPT) 1/8-27 1/4-18 3/8-18 1/2-14 3/4-14

See also

References

  1. ^ Smith, Carroll (1984). Engineer to Win. Motorbooks International. p. 184. ISBN 9780879381868. http://books.google.com/books?id=S0sNFyNwPBYC&pg=PA183. 

External links